Official Methods of Root Android 4.2.2 Firmware running on the I9505 Galaxy S4

Recently, Samsung I9505 Galaxy S4 (LTE international version) was able to update the official Android 4.2.2 Jelly Bean XXUDMH6. As you know that when you install a new firmware update you need to remove root access and perform root process again to run applications that require root permission. So if you are interested in root method run on Android 4.2.2 Official I9505 Galaxy S4, the following article will guide you.

Note:

• This original method for S4 Galaxy GT-I9505 running on Android 4.2.2 Jelly Bean I9505XXUDMH6 firmware update from Samsung KIES. How to proceed fairly simple, but can still lose personal data in the root.


• Warranty of the device will be disabled when you root, it can recover if you flash the software to conduct its official.


• Gozzone will not be responsible for any mistakes on your device. Please follow the guidance to achieve good results.

A review of the following factors prepared

• Backup your important data. Avoid case when data is deleted installation.


• Check the battery and make sure to reach over 60%.


• Had USB Driver for LG Nexus 4 machine


• Make sure USB Debugging is enabled prior to installation.


• Installation Instructions use ODIN utility which is only available on Windows operating systems. If you use the Linux operating system (such as Ubuntu) and Mac OS then use the utility to run ODIN Intersect in your operating system.

Reminder

By following this guide, you will only get root. Need to install custom recovery like ClockworkMod recovery to flash custom ROM separately or hack the I9505 Galaxy S4.

Download the following link.

• 
  I9505XXUDMH6 CF Auto Root for Android 4.2.2 Firmware <> [Filename: CF-Auto-Root-jflte-jfltexx-gti9505.tar]


• 
  Odin 3:07

Installation Method

• Extract the zip file and you will get Odin Odin3 v3.07.exe along with some other files.


• Power off the phone, waiting for the vibrator to make sure the power is off


• Put phone I9500 galaxy s4 mode "Download Mode" by pressing and holding the Volume Down and Home keys while pressing the Power button.


• Conducting run Odin3 v3.07.exe file


• Connect your device to your computer via port USB.Mot message will display in Odin's message box in the bottom press "add". If you do not get to try another USB port on your computer. or reinstall the drivers.


• Next select the file containing the unzipped files above: Click the PDA button and select CF-Root-Auto-jflte-jfltexx-gti9505.tar.


• In the Odin window, ensure the unit will restart and select F.reset Time.


• Check everything two steps mentioned above. Now, when satisfied press the START button to begin the flashing process.


• After completing the flash machine, your phone will reboot and you will quickly see a message PASS with green background in the box at the top left of Odin.