Install Android 4.3 on a tablet Nexus7 CM10.2 Nightly Flo (2013)

Nexus 7 2013 (Wi-fi), also known as Flo Nexus 7 was released recently and runs Android 4.3 Jelly Bean takeoffs box. However, many of us prefer a more custom ROM, because it usually comes with a lot of features and customization. The good news is, based on the Android 4.3 ROM for Nexus 7 CM10.2 2013 (Wi-Fi) is available only for download and installation. The custom ROM is based on Android 4.3 Jelly Bean, so using this method, you will still retain the features officially launched on your device. To proceed with the installation please read the following article.

Some features may be used after installing ROM Manager stereo, better manage Linux Kernel, bluetooth connectivity with the main power devices, decorative beauty in that version of the device is not reduced utilization rate.



Note : This guide is only for 2013 devices Nexus 7 (Wi-Fi), not for any other device.Gozzone not accept any liability relating to failure on your device. Although if you do follow the guidance would be hard to fault occurred.

Some preparation before proceeding with installation:

• Backup to restore data if the RUU is lost.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for Nexus 7 2013 (Wi-Fi).


• USB Debugging must be enabled before installing the ROM, otherwise the device and the computer will not receive each other's signals.


• Phone ClockworkMod Recovery installed.

Download the file to install

CM10.2 Official Android 4.3 Jelly Bean ROM For Nexus 7 2013 (Wi-Fi) [Filename: 20,130,827 10.2-cm-nightly-flo.zip]
Google Apps [Filename: gapps-jb-20,130,813-signed.zip]

Install

1. Connect your phone to your computer with USB cable.


2. Download and coppy files onto the phone's SD card. Note: do not extract the file.


3. Disconnect the USB and then turn off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup ROM


6. Proceed to delete data. Select "Wipe data / factory reset", then select "Yes" in a display. Wait a few minutes to delete data. Now return to the main menu CWM Recovery. Select "wipe cache partition" and after the deletion process is done, select "Wipe Dalvik cache" option at the bottom to Wipe Dalvik cache.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-grouper.zip 20,130,827" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. After completing the ROM installation process, repeat the step 7 but choose gapps-jb-file-signed.zip 20,130,813 instead of ROM zip to install the Google apps package.


9. clearly the main menu of Recovery and select "reboot system now" to reboot the tablet and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please wait.


10. If you no longer wish to use this ROM that you need to move the old ROM boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

Now you can experience the new ROM. Wishing success.

Đọc tiếp...

Root Google Nexus7 easily with just one click on Android 4.1 Jelly Bean

Nexus 7 is the root word when it has not even been put on the market. Recently Google Nexus 7 has received a possible solution to root access with just one click. Moreover, this will install ClockworkMod recovery better. So if you do not want to go through much trouble to install root procedures on Google Nexus 7 please read the following article to find solutions.

Note:

• If the bootloader is locked before running the One Click root tool, then all data will be erased.


• You note that the guide is only for Google Nexus 7 device, do not test conducted on other devices.


• Gozzone will not be responsible for any damage that may occur on your device.

Requirements needed before proceeding.

• Unlock bootloader if not personal data be deleted entirely.


• One Click Root for Nexus 7

Proceed with the installation.

1. Download and extract the file link on the new load.


2. Make sure USB Debugging is enabled on the Nexus 7 and connect it to your computer via USB port.


3. Running in the unzipped file root.exe step then follow the instructions on the screen.


4. Once finished restart the device.

Congratulations on your devices now have ClockworkMod Recovery installed and complete root access.

Đọc tiếp...