Leakage of specifications Galaxy Note 4

According to schedule the launch of the Samsung Galaxy Note product line, the Note 4 will be released at IFA in September 2014 in Berlin, Germany. And the leaked information about the specifications of this device began appearing.

According to  SlashGear , the next generation Galaxy Note will own Super AMOLED screen size 5.5 or 5.6 inches, a resolution of 2560 × 1440 pixel density of 534ppi pixel approximation. It will use a quad-core processor Qualcomm Snapdragon 805 clocked at 2.5GHz, 3GB of RAM. Capacity 32GB or 64GB of storage plus a microSD card slot supports expansion up to 128GB maximum.

Note 4 to the back of the camera has 16MP sensor with the ability to shoot 1080p video at 60fps rate and 2160p at 30fps, 2MP front camera capable of shooting 1080p video at 30fps.

You may find slightly suspect when, according to information on the Galaxy Note 4 will have a slightly smaller screen compared to Note 3., But also many comments that this is a reasonable proposal because maybe Samsung has found the most suitable size for large screen smartphone of its pen.

Đọc tiếp...

List of upcoming samsung smartphones to life KitKat

A report by Samsung by  SamMobile  published showing the process of updating to 4.4 KitKat Galaxy models 2012/2013 went into the last stage of testing.

According to the leaked list, the 4.4 update for the Galaxy Note 2 KitKat, Galaxy S4 Mini 4G, Galaxy Note 3 Neo has been completed. The other model is currently being tested and will receive updates in May and May 6/2014.

More specifically, the following model Galaxy will soon be updated to 4.4:

- Galaxy Note 2: updated.

- LTE Galaxy Note 2 (complete): May.

- LTE Galaxy S3 (end-stage test): May.

- S4 Galaxy Mini (late phase trials), Mini LTE: (Completed): June.

- Neo Galaxy Note 3 (complete): May.

- Grand Galaxy 2 (experimental): June.

- Galaxy Mega 5.8 and 6.3 (experimental): June.

Notably, the list was leaked on the international Galaxy S3 (GT-I9300) has been canceled update to 4.4 KitKat. According to  SamMobile , the reason may be because this version only has 1GB of RAM, while the LTE and the U.S. have more than 2GB of RAM.

When 4.4 launched KitKat, Galaxy S3 is less than 18 months. Hence, users could be absolutely hope top smartphone of 2012 is being upgraded. According to some insiders, Google has continually pushed Samsung to update the Galaxy S3.

The information leaked that Samsung has also started testing Android 4.4.3 on Galaxy S5 and ignore the update 4.4.2 to perform straight up the latest Android version.

Đọc tiếp...

Free office suite of tools for the Google smartphone

Google has just released the duo free office applications Docs (for word), Sheets (functional nature) for Android and iOS platforms. Users can download and use for free offline duo on their mobile devices.

Google Docs is a set of online office's famous Google which used to compete with the popular Office suite of Microsoft. Users typically use office tools via a web browser.

Recently, the "search giant" has released two independent applications Docs and Sheets for mobile users (including Android and iOS). Google has redesigned interface two applications her office style simple and suitable for mobile devices.

With Google Docs (equivalent of Microsoft Word software) that allows users to create, edit documents right on your mobile device. Content editor, edit will be automatically saved every time, meaning that if errors occur during device use, users can still secure the contents of your edit.

In addition, Google also allows more people to join and edit the content editor Docs app, similar to the online version on the web.

The application interface on Android Docs and Sheets

Similarly, the application Sheets (Excel software equivalent of Windows), users can create, edit and perform spreadsheets right on your mobile device. Like Docs app, edit the content on Sheets are stored continuously, in addition users can also collaborate to share and edit content on Sheets.

2 office suite Google Docs and Sheets allow users to use offline (offline) without Internet connectivity. In addition, the application is also closely connected with Drive service, which allows users to store their files created from this application to 2 cloud services of Google to be able to use whenever you need .

Besides Docs and Sheets 2 engine, Google said the tool will soon bring Slides (equivalent PowerPoint to create presentation slides) to the mobile platform, however it is unclear point Slides will appear on Android and iOS.

Users can download Docs app for Android  here (Android 4.0 or higher compatible) and iOS version  here  (iOS 7.0 or higher compatible).

With Google Sheets application, users can download a version for Android  here  (Android 4.0 or higher compatible) and iOS version  here  (iOS 7.0 or higher compatible).

In addition to the double office applications for Google Android and iOS has been released, early last April, Microsoft also released suddenly free office suite for Android Office, Word includes tools for composing text, Excel tool to perform spreadsheet and PowerPoint presentation to see the slideshow.

Interface tools and Excel World on Android

These files are created from Office applications This package can be viewed on the Office normal in other devices such as the iPad on your computer or on ...

Note: Office for Android currently only compatible smartphone, not the tablet support. This is an unfortunate drawback of this application. However, users can try download the installation file (apk format) offers below to install on your tablet.

Users can download the tools of Microsoft Office for Android for free  here  (APK installation file format) or in  here  (Android 4.0 or higher compatible).

 

Đọc tiếp...

Tricks for Android ROM MIUI

​

MIUI not only attract users by beautiful interface but also the attractive features built inside.After a trial period, I have a few tips for you with reference to the use MIUI ROM more interesting, especially for those who do not have much time "fiddling break" or new toAndroid .


1 . Toogles mode in Notification Bar

​

One of the best features of MIUI is the most integrated toggle frequently used features (Wi-Fi, GPRS/3G, Airplane, GPS, screen rotate, turn off the sound, ...) to the right in the notification bar status (Notification Bar) her. To enable the feature, you just need to hit the corresponding button is a feature that instantly changed. You can switch between a notification card (Notifications) and turn off the card (Toogles) at the bottom of the screen.

 2. Of MIUI Launcher

MIUI Launcher's not only beautiful, but also very much to us fiddling with it!

A. Folder

​

Similar to the iOS operating system, you can group apps in each folder separately. By default, Android also supports this feature, but it's not "art" as on MIUI. To add a folder to the screen, you press and hold on the homescreen long in space, waiting for the launcher to access edit mode (Edit mode - you can also move quickly on this feature by pressing Menu> Edit Mode). When in this mode, then you select the cube icon in the upper right corner. In the drop-down box, select the folder then drag and drop it on the homescreen that you want. Want to add a shortcut to the folder you just dragged it into the icon of the folder you just created. You can also change the name or icon arrangement and application features hidden by clicking on the Edit button in the left corner of the folder. 

B. Options in Launcher Settings

​

To access the Launcher Settings, press Menu button> Settings Launcher. There are a lot of cool stuff in this: 
+ Keep in memory: Launcher always keep running and always occupy a space defined between the machine's RAM. This will help to not restart Launcher, help us lose time waiting for Launcher reloading components. More time to call or message, view pictures and Launcher fold it just so stiff that it inhibits load! Other applications may be a bit slower than when you run many applications, but this option should remain enabled. 
+ Hi-res graphics: wallpaper particular display and better graphics in general, but I do not noticed a difference on my Motorola Milestone. The slower infiltration only. So, I turn it off. These powerful machines configured as HTC Desire or Nexus S can test this feature. 
+ Icon shadows: shadows for icons on the homescreen. It can be on or off depending on your preference because it does not affect the operation of the machine. 
+ Drawing cache: cache created to display the Launcher component faster. If desired, you can turn it off, but can cause hysteresis when used. 
+ Transition effects: effects homescreen when browsing between pages. Some beautiful but slow.You can choose to select the most suitable effects for themselves. 

3. Quick search in the phone call

​

Calling process's default MIUI only be summed in two words: "Excellent." With some keyboard combination text T9, in addition to pressing the number to call, you can use the characters on the keyboard to search for contacts anymore. For example, you want to find the word "Ming", press 6464.All contact with "Ming" will appear, you just choose a favorite number and make a call. Very convenient and fast. In addition, you can also find the phone number of someone in a similar manner. 

4. Tips for Music Together with the beautiful and eye-catching interface, the MIUI Music player has more features than the default Android music player, so you can use your help very much more boring. 

A .Removing the audio file is not music

​

MIUI Music gives you a "filter" by relying on the size of the file. The game's audio files are usually smaller than 1MB, so these files are not added to the library of MIUI. To resize filter, you access the Music app, press Menu> Settings. Scroll down, in the Filter files, you have to drag a slider. Also you have a more effective way is to use filters in folder (also immediately appear in the Filter files).Uncheck the folder containing the audio file undesirable. B. Search, download pictures and album lyrics

​

MIUI Music has the ability to automatically search for album cover image if you are connected to the Internet. Besides, the lyrics are also downloaded and displayed corresponding song karaoke style.Want to save them into audio files so next time we can use without an Internet connection, you click on the Menu> Edit song information. You have several options:

[Box = 700] + Edit ID3 information: correction of the file tag information, such as song title, artist name, album name, genre, ...
Download + Lyrics: search and download lyrics for songs .
+ Use saved lyrics: use right lyrics you have downloaded.
+ Download album art: download album art.
+ Use saved album art: use the album art stored in the music files. [/ box]

C. Equalizer

​

An indispensable player walking sound calibration (Equalizer - EQ). MIUI has always EQ! To turn on and adjust the EQ to your liking, you click between screens while in Now Playing, select the icon bar showing waves near the time you will see the EQ of MIUI. Still not much to adjust the frequency as other professional applications but also improves the sound when you turn the EQ lot of this. There are a number of EQ stored compatible with every kind of music anymore. 5. Attach notes on Homescreen

​

By default, MIUI is available for your Notes applications called widgets which is attached to this application. You can add a Note widget, choose colors for it (click the button in the upper right corner of the screen when open note), adjust font size and even prepared a list of to-do checklist format (Menu button> select Enter checklist). fact handy for those who frequently use the notes feature of Android fast as we can schedule a reminder for the content of the notes by accessing Menu> More> Remind me. Here, you select the desired time.

​

6. The attractive features on Camera

​

MIUI Camera for very high image quality, better than the default Motorola photography that I've ever tried as well as of the ROM camera. In addition, there are other fun things to support your photography:+ Anti-shake: anti-shake when shooting. You must hold very still, the new software allows recording. + Burst: continuous shooting multiple shots. + Color effects: color effects (old photos, photo increase color saturation, negative image, green color, purple color ...) + Delay timer photography. + Screenshutter: add to screen a number of tools such as increasing or decreasing the brightness, turn off the flash, zoom, ... + Sound: turn off the sound when shooting. 

7. Turn right flashlight LockScreen

​

To turn the flashlight with flash on the lockscreen phone, press and hold the Home button okay. Note that when you trade hand means that the lights will turn off. 

8. The volume control on the Monitor

​

Monitor is an application of MIUI preset allows you to control the volume on which the application was used. You can check the amount sent and the by Wifi or mobile network. Besides, Firewall Monitor feature also allows you to put the right to use Wifi or 3G network for each application, then you will reduce the amount of waste charges. To enable the Firewall, you switch to the Firewall tab. Looking down the bottom of the screen will show actuating button to turn it on.

Features Firewall Monitor

9. Adjust the font to by Spare Parts +

​

We can say MIUI ROM is one of the most beautiful interface of the android ROM for the PC are supported. However, the downside of MIUI small font is too small. To remedy this situation, you go to the Market, download Spare Parts + applications. Once downloaded, run the application up, pulled down below and select the font size on the entry. You should choose Extra Large or Larger to look better. Also, you can adjust a number of other features such as action on when you press end call button (End button behavior), turn off vibration feedback (haptic feedback), adjust the battery saving mode Using Wi-Fi (Wi-Fi sleep policy), open a window or effects of the current virtual keyboard (Windows Animations, Transition Animation, Fancy input animations.)

 10. Guard mode

​

In Guard mode feature, all messages and call logs are hidden and Launcher can not be edited (add or remove shortcuts, edit widget, ...). However, you can still texting and making calls to and from. This feature is appropriate when you need to borrow someone's computer or do not want anyone to know about the call logs and intercepted his message. To enable the Guard mode, you drag down the notification bar status, switch on the card and select Toogles Guard mode. A small icon image will appear on the fence bar notification to us of the status of the Guard mode toggle. 11. Reply to a message without running the MMS

​

When you're using an application that has a message to, MIUI will immediately show a small dialog box with the message content so that we see and respond quickly without having to exit the current application. The delete button, close the dialog box also appears for you to choose. I have not seen this feature on any other ROM for Android. wish everyone had lots of fun with your phone. If you experience any of MIUI, please share with everyone in this topic right now okay.

Đọc tiếp...

To sum up some useful tips for Android 4.4 KitKat

 ​
Android 4.4 KitKat has launched more than three months, and now many brothers began to have access to this version of the operating system through the update ROM genuine as well as cook. After a time I had to use some tricks to share with you, from tweaking things in the system, a new app for the tip activated hidden features. Hopefully it will help you use your device more efficient and delicious.article content will include the following, drawn to his brother easily monitored

Video

​

1. Completely new file picker

This is one of the best improvements of Android 4.4 KitKat because it allows us to select files is easy and accessible to many different storage areas. You try running a certain application should open the file, for example when composing a message in Gmail, select the menu button and then click on "Attach file". In the open interface (exact name is "File Picker" to me), we can choose the file from the drive its Google Drive, a private browsing file photo / video / audio is stored on the device, open the downloaded file. And yet, we also have a section "Internal Storage" to choose freely any files are stored in the system. You are also allowed to select the built-in applications or third-party app to browse files anymore. During the android before, if you want to use a powerful File Picker on, you have to install the app from the outside, while now it is available in machine always. It was great! Note that if you can not browse files stored in the internal memory or SD card, then select the menu File Picker button, tick the box "Display advanced devices" okay.

​

2. Re-enable the lock screen widget outside

mount features a lock screen widget has been Google launched last year, but for security reasons, but it has so disabled by default on Android 4.4. Many of you have asked yourself, available here please share with you always. To enable this feature, you visit the Settings> Security tab> Security Screen select items in the line "Enable widget" . Then you rotate the lock screen, slide your finger from left to right to select and attach widgets as before. Hopefully this little trick will help you use Android 4.4 KitKat more effective. 3. Enable display mode% battery hidden KitKat In Android 4.4, Google has integrated a display mode for system battery percentage. Advantages of this feature is that we do not have root or tweak the file system as the method mod or theme tune before. It seems to show battery% is still unfinished new Google should have to hide it, typically we have to use white as the text color illustrations to his head and it's all over with colored feedback of batteries . If you wish, you can download the apk file below on, installed in your computer, run the application "Percentage Enabler" up and built the box "Enable battery trăm" is finished. Percentage Download Application Enabler

 ​

4. Slide your finger to the left edge of the screen to activate Google Now

Ever since Android 4.1 Google Now we have a tool that provides intelligent information very useful and based on context, location, time of day . To activate it, the machine has virtual keys on the screen, then you'll slide your finger from key to the home, or click on a certain key specified by the manufacturer.KitKat up to Android 4.4, we have an easy and fun way than to run Google Now: slide your finger from left to right while in the lock screen. Notice:

• With the Nexus 5, then you do not need to spend this feature, you must use Google's launcher.It's an easy way to install, the file you just downloaded three PreBuiltGmsCore (Google Play Services 4.0), Velvet (Google Search) and GoogleHome (Google Launcher). Then, install all three on a smartphone you're holding is finished.


• If you force close error when using Google Voice Search, then press and hold the home screen, select Settings> Voice> Select Language . The default is English, you go through other languages, such as Vietnamese, then do a search for something great. Then if you want to use in English, select English as the back.


• If you do not have Google Now, try to change the system language to English, to boot, on the application next Google (blue logo)> press menu> Google Now turn . Now when was running up and then you can change it if you like Vietnamese.

5. Create reminders in Google Now

OK, we had plenty of reminders or app, but Google Now also available to provide a very convenient tool jog. When you open Google Now, you look to the lower left screen button with a hand saw. Click here and Reminder will open interface, then just click the + sign to add a new reminder. Next, proceed to select the content to which it will now prompt you notice, at what time, day, and repeat or not. You can also choose the location-based reminders, that is, when you come to a certain location X, the machine will display a message on, do this by clicking on the "Where" circle.

​

6. Take advantage of the new phone

's new Android Dialer 4.4 KitKat very tasty, not inferior compared with the third party app on Google Play and also a lot of new features compared to previous Android. For example, you can quickly search for contacts by search box located at the edge of the screen, supports voice search, use the T9 numeric keypad for name suggestions. In addition, Google applications are also equipped with new features that they called "caller ID". That is, if the number of phone calls to not be identified in the phonebook, then Google will give you information about that number. 

7. Skip alarm waking up early Surely sometimes you also have to wake up before the alarm sounds. And usually forget or do something so busy that we do not turn off the alarm on the phone, so it's just annoying screech. To solve this, KitKat Android 4.4 will display a message on voice alarm versus 1 hour before you install under "Upcoming Alarm". If you get up early, you can click "Dismiss Now" in the notification area and always turn off the alarm will be, we should not have to run up the clock app again.

 ​

8. Choose the default launcher and the SMS

Before you install additional third-party launcher on, we do not have the option available to simply switch between launcher together quickly. Up to the KitKat Google Android 4.4 adds an item "Home" in the system settings (Settings), go into it and you can freely choose the launcher in its sole discretion, not to install any app management any other reason. Additionally, you probably also know that Android 4.4 KitKat will require us to choose an application to the default SMS messaging. With the Nexus you spend, the default will be the Hangouts app, there are some other machines the manufacturer's own SMS, or you can install a third-party app. In case you need to switch the default SMS application, go toSettings> More> Default SMS app .

​

9. Manage RAM consumed by available tools

"Stats Process" ( ProcsStats ) located in the configuration section for developers on Android 4.4 KitKat. When visiting Settings> Developer options> Process Stats , we will be able to monitor applications and services are active, the frequency of which is long running, high capacity RAM and RAM middle average that is how much we use. When you see an app that takes up more RAM too, you can disable it manually by selecting the app needs to close, click the "Force stop." you can also select the button menu> Stats type to see statistics of the RAM consumption of the software runs in the background (background), running "well" (foreground) or run as processes in the cache (cache.)Note: If you do not see the Developer Options, go to Settings> About phone / tablet> Build Number touching lines from 5 to 7 consecutive times .

​

10. Try spending ART, who decoded the new

KitKat In Android 4.4, Google has launched an alternative for the guy who decoded old Dalvik, which is Android Runtime (ART). The biggest benefit of ART is that it allows programmers to write software Android continues to follow the way that they have done so far, their software can also run on many device types and different CPU , but with a considerably faster speed. Feeling the machine smoother.A trial version of ART has been embedded in Android 4.4 and you can find it in Settings> Developer Options> Select Runtime . Note: Some machines can cook ROM without ART, and the activation it to the system and can cause serious trouble applications because only in the testing phase. You should read more articles about Android Runtime Learn before you try to activate ART. Yeah, that's what I gathered over time. Now turn to you, if any tricks or anything related to Android 4.4 KitKat then shared within this topic is always okay. Thank you and wish you happy!

Đọc tiếp...

Up Method ROM for I9500 Galaxy S4

In this article we will guide you to read detailed step by step method of writing up a user ROM (Custom ROM) on the phone are very popular today I9500 Galaxy S4. First, you must download the ROM and Gapps applications related files (in most cases). Then follow the steps below to install Custom ROM on I9500 Galaxy S4.



Note:

• Make sure that you have made ​​all the preparations that we have mentioned in the previous section. Preparing safety devices before installing the ROM for I9500 Galaxy S4


• It can work with TWRP Recovery or any other recovery tools. In previous posts I have advised to take ClockworkMod Recovery in this case.


• This software is Google and Samsung released


• Do not try to remove the following steps to avoid damaging it.


• Never ignore Nandroid backup because it is very useful when new Rom does not work up any way you want.

If you have trouble booting or rebooting repeatedly, then proceed to delete the cache and Dalvik cache several times before restarting.
To ROM 5 minutes after first boot to resolve all things.

Optional File
A ROM version any Google Apps  for the corresponding ROM

Up ROM I9500 Galaxy S4 ways:

1. Connect your phone to your computer with the USB cable.
2. Copy the downloaded file on the SD card of your phone. Note: Do not unzip any files.
3. Disconnect the USB and then turn off your phone.
4. Now boot into ClockworkMod recovery by simultaneously pressing and holding Volume Up + Home, then press the Power button and you will see the recovery options. Use the Volume keys to navigate options in Recovery also the Home key to select an option.
5. Make a Nandroid Backup of your current ROM, so you can restore later if the new ROM does not work or you want to go back to the old ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Back to main Recovery menu after completing BackUp.
6. Next perform wipe data. To perform select data wipe (wipe data) / factory reset, then select Yes on the next screen to confirm your operation. Wait a few minutes for the data to be erased. Now return to the main menu CWM recovery. Select wipe (wipe) cache partition and after the process is done, select Wipe Dalvik cache under option to wipe Dalvik cache implementation.
7. Choose install zip from SD card, then choose Zip from SD card. Example Locate the ROM code you copied earlier in Step 2 and select it by pressing the Home button. Confirm installation by selecting Yes - Install _____. Zip on the next screen. The ROM installation will start automatically.
8. After installing the ROM is done, repeat step 7 but choose instead Gapps zip ROM zip file to install the Google apps package.
9. Now repeat step 6
10. When everything has been done, go back to the main recovery menu and select reboot system to boot the phone and use the new ROM. First boot will take time so please be patient.
11. Restore the previous ROM: To return to your previous ROM, boot into recovery, choose backup and restore then restore your previous ROM by selecting from the list.

So you have successfully installed the ROM on I9500 Galaxy S4. Good Luck.

Đọc tiếp...

Sony launches AOSP 4.2.2 ROM for Xperia Tablet Z

Sony is a company very active in supporting users' fiddling break "their Xperia devices. Previously Sony used to launch the Android Open Source Project ROMs (AOSP, Google Instant ROM stem and just edit it to run) for Xperia S, Xperia Z and now it's your turn Xperia Tablet Z.
The company has published the source code of this ROM to online programming community members can participate in the development and overcome current problems. Not to mention that Sony feature that has run what is and what is not operating, the airline has not posted a ZIP file to flash.
Maybe tomorrow there will be community-ROM from Cook. Anyway, the Sony's efforts to support the community ups like the ROM is laudable and the company revealed that an AOSP ROM for Xperia ZL will soon be released.

According to Sony Mobile

Đọc tiếp...

Jelly Bean Android 4.2.2 ROM on Samsung Galaxy S3 (leaked version).

In recent years, the world's smartphone seems to devote attention to the two product lines hit the Galaxy S4 and HTC one. Galaxy S4 in its products, the company offers many additional features to its software helps phone smart and perfect than the product formerly known as the Galaxy S3.If you are bored because not enough funding to upgrade their phones while S4 wanted to use the features of the S4, the gozzone today will introduce to you a new ROM for S3, help you make enjoyed most of the great features on the Galaxy S3.

The most important feature in the ROM

1. Providing full featured Android version 4.2.2 Jelly Bean officially as the screen lock widget, daydream and activity announcements ...


2. S4 with the new lockscreen unlock different effects and some other tweaking.


3. New screen adaptation and new camera effects like the S4


4. Placement-style interface of S4 Tablet


5. Voice Control and Voice need new S4


6. Note 2 S4 and stylish Samsung apps full screen.


7. Change utility Widget


8. Driving Mode.

And some more features will appear when used.


You should note that this is a leaked version rather than the final version, so it may still contain some bugs incomplete. So if you really want to use the update until a final version, this is the only way to run on S3. Recommends that gozzone install is not responsible if the equipment is damaged. Although it will be hard failure occurs if you follow the instructions properly.

Request

Only dedicated GSM international version of the Galaxy S3 9300, not for any other device. Having Samsung Drives Leaked Android 4.2.2 ROM for Galaxy S III XXUFME3 3:04 Odin (in the file)

Up ROM Conduct

1. Backing up data in case you later need to reflash the old ROM.


2. Download and extract the contents of the ROM download to your computer.


3. Download and install the Samsung USB Drivers if you have not yet installed.


4. Power off the phone and into Download Mode by holding down the Home button and volume-down button while rebooting.


5. Launch Odin on PC and connect your phone via USB. You will receive a green signal indicator on Odin.


6. Click on PDA and select the file in odin I9300XXUFME3_I9300OJKFME1_HOME.tar.md5.


7. Leave such things and make sure that Re-partinion is unchecked.


8. Click on start to start up ROM and wait for completion.

In case you run into problems bootloops or force-closes when you restart after finishing UP ROM, boot and recover your phone. So backup before Upload new ROM is very important.

Đọc tiếp...

What to do to install Android 4.1.2 Firmware XXDMD1 Jelly Bean 2 10.1 P5100 GalaxyTab

Now you can download directly to software upgrade for Galaxy Tab 2 10.1 GT-P5100 Andrdoi to version 4.1.2. The new national level including Thailand, Vietnam, Indonesia, Philippines and Malaysia. Current firmware is not available in Samsung Kies but you can download and install using OTA update. For those who do not want to update OTA, but still want to upgrade Android version 4.1.2 can keep track of Vietnam Andoird instructions below to upgrade. Note that the firmware in ODIN flashable firmware download is not CWM flashable recovery. You can always root Android 4.1.2 Jelly XXDMD1 root with the appropriate method. Official Firmware is also the best option to unroot Galaxy tab 2 10.1 GT-5100 or unbrick Wii Galaxy Tab 2 10.1 GT-5100 if the brick because software problems.

Warning that we are not responsible in case of failure when rooting. You should comply with the instructions to avoid unfortunate circumstances happen. Please make a backup before conducting root. And it only for products Galaxy tab 2 10.1 P5100 version. Do not try to use it for other versions.

Conditions to

1. SMS & Call Log - Use SMS, MMS and Call Log Entries Backup & Restore App


2. Contacts & Settings - Use the default backup options Android


3. Images, Songs, Videos, Files - Copy to SD card.


4. APN and MMS Settings - note section "Applications> Settings> Wireless and Network> Mobile Networks> Access Point Names" WhatsApp Messenger - WhatsApp Messenger Backup Data Manually.

Important

1. Check Battery, Battery ensure more than 80% achieved avoid being disconnected root source


2. Foler EFS Backup to save your IMEI number and other critical data.


3. Installing the USB Driver for Galaxy Tab 2 10.1 in your PC.


4. Make sure USB Debugging is enabled otherwise you will not be able to transfer files between computer and mobile phone.


5. Installation Instructions use ODIN utility only works on Windows operating systems. If you use the Linux operating system (such as Ubuntu) or Mac OS, the use Crossover Utility to run ODIN in your operating system

After studying carefully this article can wait to see the next article updates detailed instructions on UP XXDMD1 Android 4.1.2 official ROM for Galaxy Tab 2 10.1 P5100.

Đọc tiếp...

Install Android 4.2.2 UBUAMDG latest version for Galaxy S4.

Recently, Samsung has released an official update for the Galaxy S4 to version 4.2.2 UBUAMDG Android Jelly Bean. You can download this firmware update by telephone or personal computer or can be downloaded from Kies update available from system firmware update feature. For the manual method you need to download the 4.2.2 firmware UBUAMDG Android Jelly Bean and then carried it up UP I9500 Galaxy S4 follow the instructions below.

So here is an update with no modem, so it can be up to any version of the Galaxy S4 I9500 products (except China, Taiwan, Hong Kong). To install the firmware, we will use a tool that ODIN to stock ROM 4.2.2 Up Jelly Bean. During the installation process you may lose all data and affect your device. So let's create a backup before proceeding Up firmware up to prevent future failures can install the old ROM. Although mistakes can be difficult if you do the right step instructions.
them I will not be responsible for any damage caused on your device.

How to back up your data before a new version Up.

1. SMS & Call Log: Using SMS, MMS and Call Log Entries Backup & Restore App


2. Contacts & Settings: Use the default backup option for Android


3. Images, Songs, Videos, Files: Backup all this information to the external SD card


4. APN and MMS Settings attention from section "Applications> Settings> Wireless and Network> Mobile Networks> Access Point Names"


5. WhatsApp Messenger: WhatsApp Messenger Data Backup by hand.

Note: You can backup your phone data with Kies but it's best to back up directly by hand.

Download Samsung I9500 Galaxy S4 USB Drivers

Connect your computer and the S4 Galaxy I9500 ODIN card to access. But the work will not be done if you do not have a driver installed appropriately. Technically, after connecting the phone to a Windows PC for the first time, it will download and install the necessary drivers, if not load the driver by following the link.

Download S4 I9500 USB drivers

A few things to note

Make sure the battery life of over 60% avoid all versions are up battery, this will cause the device to malfunction if your device is turned off abruptly.
Foler EFS Backup to save your IMEI number and critical data other.
Make sure USB Debugging is enabled otherwise you will not be able to transfer files between computer and mobile phone.
installation instructions on using ODIN utility only works on Windows operating systems. If you use the Linux operating system (such as Ubuntu) or Mac OS, the use Crossover Utility to run ODIN in your operating system

Down load firmware

Đọc tiếp...

Install Android 4.2.2 ROM for HTC One S Jelly Bean C2

Recently, the use of smartphones HTC One S C2 has received good news is that they were able to successfully upgrade their devices to Android 4.2.2 Jelly Bean version with an unofficial ROM.ROM is a modified design and quite good with cunstom AOKP ROM. Android Jelly Bean based on AOKP 4.2.2 comes with Acid Audio Engine. So if you are a music lovers will surely love to use this ROM.



HTC Ones C2duoc launched in 2012 running android 4.0. One of the features that Android Jelly Bean 4.2.2 AOKP ROM-based activities:

Wifi Tethering; OTG; Torch, Headphones, Camera, FFC, GPS, Voice Recorder, Wi-Fi, Audio, Data Calls; Button lights; Vibration; Mount USB, Charging, LEDs, sensors, Rooted, Bluetooth, Voice Search (update play in store ) and video playback.

For your safety, vietnamAndroid recommend that you backup your data before proceeding safely install datROM.Chung do not assume any responsibility if there is any damage to your device.Although if done properly conducted, the following steps will be difficult for the incident.

Note: This guide is dedicated to the HTC Ones C2 product line, you should not use any other product can cause severe equipment damage.

Installation Instructions

1. Boot the phone into recovery mode (CWM / TWRP recovery)


2. Create a Nandroid backup


3. Wipe data / factory reset, wipe Dalvik cache, format system. Perform 3 times to keep safe from the boot loop error


4. Flash ROM and install Google applications (usually not due to the ROM comes Apps)


5. Repeat step 3 again


6. Reboot your device

You can download the ROM here

Đọc tiếp...

Stable cash CyanogenMod Version 10.1 RC3 available for download today, supporting multiple devices

10.1 CyanogenMod is one of the best versions of this ROM for Android devices. Not only offer the latest android version 4.2.2 Jelly Bean, CM10.1 also brings a lot of custom user interface and performance worth.

In an effort to build a blazing stable CyanogenMod ROM version 10.1, the development team has recently released a stable version of money RC3 (Release Candidate) with a focus on a variety of fixes related to the ROM camera recoder .

Also on this version some bugs related to the launcher interface as well as bug fixes overcome bad icon on the tablet, widget bug fix, fix launcher FC's T9 and overcome so many translation errors exist.

The device supports download this updated version includes (other devices will be gradually updated in the near future):

Sony Xperia Z

Sony Xperia Tablet Z

Google Nexus 7 (GSM and Wi-Fi)

Motorola Droid Razr

Amazon Kindle Fire

LG Optimus G (Intl)

Samsung Galaxy S III (Verizon, U.S. Cellular, Sprint, Metro PCS, Cricket, T-Mobile and AT & T)

Acer Iconia Tab A700

Asus Transformer Pad Infinity

LG Optimus 4X HD

Google Nexus 4

HTC One X

To download the latest ROM for your device you can access directly on the developer's home pagehere

Đọc tiếp...

Paranoid Android 4.0.4 ICS ROM for the LG Optimus L3 E400

LG Optimus L3 E400 recently announced an update to the unofficial ROM Android 4.0.4 ICS version. Android 4.0.4 ICS based on Paranoid Android comes with fame Hybrid Engine lets you run an application in the phone, phablet and tablet mode. So, this ROM is for those who love to explore the application of the special tablet on their devices. It also provides you with a bloatware free experience with the use of different features adapted from a popular CM9 ROM.

LG Optimus L3 E400 Smartphone is launched in 2012 comes android 2.3.6 Gingerbread version.Since then this device does not receive any official update. Technically, the LG Optimus L3 E400 can not run the Android 4.0.4 ICS ROM Paranoid Andoird but with the opposite, they can run quite smooth.

Android 4.0.4 ICS ROM based on the paranoid android features work as follows

1. Android 4.0.4


2. CM9 ICS based


3. Famous 'Hybrid Engine' to run different applications in DPI


4. Preloaded Google apps

You should backup your data before proceeding with factory installed new ROM, because it may be damaged in the process of installing the ROM, can we Up the old data. Gozzone will not take responsibility for the failures encountered Up ROM, although it is difficult to damage if you get it right with the wizard.

Guide to Install Android 4.0.4 ICS ROM Paranoid

1. Boot into recovery (CWM / TWRP recovery)


2. Create a Nandroid blackup


3. Wipe data / factory reset, wipe Dalvik cache, format system. Perform 3 times to keep safe from the boot loop error


4. Flash ROM


5. Repeat step 3 again


6. Reboot your device

ROM developed by: nikufellow Download LG Optimus L3 E400 Android ROM Android devices: LG Optimus L3 E400

Đọc tiếp...

Update version SCH-I535 Galaxy S3 to Android 4.3 Jelly Bean

In the latest update, Android 4.3 Jelly Bean has added many new features and you should start downloading. As we all know, does not have an official version of Android 4.3 ROM for S3, so we will have to use a custom ROM. CM10.2 10.2 aka CyanogenMod is a custom ROM provides you with bloatware free AOSP like experience but with plenty of customization and control. If you want to install Android 4.3 Jelly Bean for Galaxy S3 SCH-I535 please read the following article for reference.

A number of useful features that you can enjoy when using: management stereo effects, improved Dialpad (referred keyboard), better management of Linux Kernel, which can set up the bluetooth devices weakness, users control the limited profile, lightweight features not reduce the operating speed of the machine, and so much more.



Note: This application is only for Samsung galaxy S3 device SCH-I535 can not be used on other versions. Gozzone will not accept any liability related to malfunctioning equipment when conducting your update. Although it will be hard error if you do follow the instructions as below.

Before you install the ROM, you should check and perform the following steps to ensure the safety of equipment and data.

• Backup data devices.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for SCH-I535 Galaxy S3.


• USB Debugging must be enabled before installing the ROM, otherwise the device and the computer will not receive each other's signals.


• Phone ClockworkMod Recovery installed.

The ROM file to install 
CM10.2 Official Android 4.3 Jelly Bean ROM for Galaxy S3 I535 [Filename: 20,130,819 10.2-cm-nightly-d2vzw.zip] Google Apps [Filename: gapps-JB-20,130,813-signed.zip]

Install ROM

1. Connect your phone to your computer with USB cable.


2. Download and coppy files onto the phone's SD card. Note: do not extract the file.


3. Disconnect the USB and then turn off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup of ROM, so later when ROM does not work as you like or do not like, you can update back to the old ROM.


6. Proceed to delete data. Select "Wipe data / factory reset", then select "Yes" in a display. Wait a few minutes to delete data. Now return to the main menu CWM Recovery. Select "wipe cache partition" and after the deletion process is done, select "Wipe Dalvik cache" option at the bottom to Wipe Dalvik cache.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-d2vzw.zip 20,130,819" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. After completing the ROM installation process, repeat the step 7 but choose gapps-jb-file-signed.zip 20,130,813 instead of ROM zip to install the Google apps package.


9. Back to the main menu of Recovery and select "reboot system now" to reboot the phone and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please wait.


10. If you no longer wish to use this ROM that you need to move the old ROM boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

Đọc tiếp...

Install Android 4.3 Jelly Bean on Samsung Galaxy S3 SGH I747

If you own a Samsung Galaxy S3 handset, the SGH I747 have good news for you, it's the developers recently launched an Android 4.3 Jelly Bean Up ROM (Stock ROM of this smartphone the 4.1.2 version). In the article below, Vietnamandroid will guide you how to install Android 4.3 custom ROM CM10.2 on AT & T SGH-I747 Galaxy S3.

Some features Android 4.3 Jelly Bean you after up ROM Manager stereo effects, improved dialpad, bluetooth connectivity with low-power devices, control user accounts with limited profiles, optimal features to speed phone not delayed.



Note : The Update is only for devices Samsung SGH I747 Galaxy S3, not for other devices.Gozzone no responsibility for equipment failures that may occur during the Up ROM.Although if you do the right step instructions would be hard to fault occurred.

Preparation:

• Backup all data.


• Check the battery for at least 60%


• Computers installed USB Driver for Samsung I747 Galaxy S3


• Make sure USB Debugging must be enabled. If not, is difficult to transfer files between computer and phone.


• Your device has ClockworkMod Recovery installed.

Download the following link

• CM10.2 Official Android 4.3 Jelly Bean ROM for Galaxy S3 I747 [Filename: cm-10.2-20130819-Nightly-d2att.zip]


• Google Apps [Filename: gapps-jb-20130813-signed.zip]

Up ROM Conduct

1. Connect your phone to your computer


2. Download and coppy files on the SD card of your phone. Note: do not extract the file.


3. Disconnect the USB and power off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup ROM by: Choose "Backup and Restore" and then continue to choose "Backup" again. Return to main recovery menu after backup is complete.


6. Conduct data deletion.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-d2att.zip 20,130,819" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. Wait for complete, repeat step 7, but choose gapps-jb-file-signed.zip 20,130,813 to install the Google apps.


9. Back to the main menu of Recovery and select "reboot system now" to reboot the phone and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please be patient.


10. If you want to return to the old ROM just boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

So you can use Android 4.3 Jelly Bean on Samsung Galaxy S3 device SGH I747.

Đọc tiếp...

Update Motorola Droid to Android 4.3 XT907 M Rarz Jelly Bean

Motorola XT907 Droid rarz M is a new device in the product line was recently launched by Motorola. The official version of the Android phone only 4.1 Jelly Bean is highest. But not so we have to wait until the final version is released. Recently, CynogenMod has launched the Android 4.3 Jelly Bean ROM so users can use the Jelly Bean Android 4.3 on the Motorola Droid XT907 M Rarz. Vietnamandroid The following article will guide you how to do it.

Some common features in Android 4.3 will have on your device after successful installation: stereo Management, called improved keyboard, better manage Linux Kernel, bluetooth connectivity with devices weak power, optimum operational features in version for devices without using speed reduction.



Note : This software is only for devices Motorola XT907 Droid Rarz M, not to be used for other devices and versions. Gozzone not responsible for any damage on your device to install.Although it will be hard error occurs if you do the right thing following guidelines.

It should be done prior to installation to ensure the safety of equipment and personal data.

• Backup to restore data if the RUU is lost.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for SCH-I535 Galaxy S3.


• USB Debugging must be enabled before installing the ROM, otherwise the device and the computer will not receive each other's signals.


• Phone ClockworkMod Recovery installed.

Download the file to install

• CM10.2 Official Android 4.3 Jelly Bean ROM for Motorola Droid Razr XT907 M [Filename: cm-10.2-20130819-Nightly-xt907.zip]


• Google Apps [Filename: gapps-jb-20130813-signed.zip]

Proceed with the installation.

1. Connect your phone to your computer with USB cable.


2. Download and coppy files onto the phone's SD card. Note: do not extract the file.


3. Disconnect the USB and then turn off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup of ROM, so later when ROM does not work as you like or do not like, you can update back to the old ROM.


6. Proceed to delete data. Select "Wipe data / factory reset", then select "Yes" in a display. Wait a few minutes to delete data. Now return to the main menu CWM Recovery. Select "wipe cache partition" and after the deletion process is done, select "Wipe Dalvik cache" option at the bottom to Wipe Dalvik cache.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-xt907.zip 20,130,819" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. After completing the ROM installation process, repeat the step 7 but choose gapps-jb-file-signed.zip 20,130,813 instead of ROM zip to install the Google apps package.


9. Back to the main menu of Recovery and select "reboot system now" to reboot the phone and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please wait.


10. If you no longer wish to use this ROM that you need to move the old ROM boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

So you can use Android 4.3 Jelly Bean-based custom ROM on the phone CM10.2 Motorola XT907 Droid M's you.

Đọc tiếp...

How to Root LG Optimus G Pro e980

Most of the latest LG devices are not user-friendly manufacturer known. Recently however, there is a good news for those who owns the phone LG Optimus G Pro e980 is now they can more easily root and install CWM recovery possible to enjoy custom ROMs and mods. Root also necessary to draw the best Vietnamese LG Optimus G Pro e980. Having Root, you can easily overclock - CPU & GPU underclock, CSOs can ask for permission to install applications as root file system access to remove bloatware or adjust it.

Introducing the LG Optimus G Pro via e980: This is a 5.5 inch smartphone screen, reaching 401 ppi density. True Full Screen HD-IPS LCD. Ram 2GH, the APQ8064T Qualcomm Snapdragon processor (1.7 GHz Quad-core). With Root and CWM you can use right with the features mentioned above.

Note : Instructions only for the LG Optimus G Pro e980, not used on other devices. Gozzone is not responsible for any damage on your device in the root. Although if you do follow the guidance would hardly be faulty.

The work to be done before installing the ROM to ensure the safety of equipment and data.

• Backup to restore data if the RUU is lost.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for SCH-I535 Galaxy S3.


• USB Debugging must be enabled before installing the ROM, otherwise the device and the computer will not receive each other's signals.


• A computer running the Windows operating system

Download files need to root

Download e980-UniversalRoot.zip

Conduct Root device

1. Unzip the downloaded file e980-UniversalRoot.zip


2. Make sure your phone Change Only mode. Then connect the computer to the phone for 3 minutes and then do the next step.


3. Open the extracted folder and run CurrentRoot.bat by double clicking it.


4. When it's suggested you to MTP mode, follow in the same place that finds Charge Only.Now wait at least 3 minutes. This will ensure that your computer has been regarded as a telephone MTP device. Do not hurry because it can cause root process is broken.


5. Press any key to continue.


6. Once done your phone will reboot. Then you can disconnect your phone from the computer.

So you've managed to Root LG Optimus G Pro e980.

Đọc tiếp...

Install Android 4.3 on a tablet Nexus7 CM10.2 Nightly Flo (2013)

Nexus 7 2013 (Wi-fi), also known as Flo Nexus 7 was released recently and runs Android 4.3 Jelly Bean takeoffs box. However, many of us prefer a more custom ROM, because it usually comes with a lot of features and customization. The good news is, based on the Android 4.3 ROM for Nexus 7 CM10.2 2013 (Wi-Fi) is available only for download and installation. The custom ROM is based on Android 4.3 Jelly Bean, so using this method, you will still retain the features officially launched on your device. To proceed with the installation please read the following article.

Some features may be used after installing ROM Manager stereo, better manage Linux Kernel, bluetooth connectivity with the main power devices, decorative beauty in that version of the device is not reduced utilization rate.



Note : This guide is only for 2013 devices Nexus 7 (Wi-Fi), not for any other device.Gozzone not accept any liability relating to failure on your device. Although if you do follow the guidance would be hard to fault occurred.

Some preparation before proceeding with installation:

• Backup to restore data if the RUU is lost.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for Nexus 7 2013 (Wi-Fi).


• USB Debugging must be enabled before installing the ROM, otherwise the device and the computer will not receive each other's signals.


• Phone ClockworkMod Recovery installed.

Download the file to install

CM10.2 Official Android 4.3 Jelly Bean ROM For Nexus 7 2013 (Wi-Fi) [Filename: 20,130,827 10.2-cm-nightly-flo.zip]
Google Apps [Filename: gapps-jb-20,130,813-signed.zip]

Install

1. Connect your phone to your computer with USB cable.


2. Download and coppy files onto the phone's SD card. Note: do not extract the file.


3. Disconnect the USB and then turn off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup ROM


6. Proceed to delete data. Select "Wipe data / factory reset", then select "Yes" in a display. Wait a few minutes to delete data. Now return to the main menu CWM Recovery. Select "wipe cache partition" and after the deletion process is done, select "Wipe Dalvik cache" option at the bottom to Wipe Dalvik cache.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-grouper.zip 20,130,827" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. After completing the ROM installation process, repeat the step 7 but choose gapps-jb-file-signed.zip 20,130,813 instead of ROM zip to install the Google apps package.


9. clearly the main menu of Recovery and select "reboot system now" to reboot the tablet and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please wait.


10. If you no longer wish to use this ROM that you need to move the old ROM boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

Now you can experience the new ROM. Wishing success.

Đọc tiếp...

Upgrade Samsung Galaxy S2 to Android 4.1.2 Jelly Bean I9100P

The good news for you is to own a phone that I9100P Galaxt S2 now they can upgrade their version to Android 4.1.2 Jelly Bean. There are two ways to update to upgrade it to Android 4.1.2 Jelly Bean XXLSS official firmware through Kies or official OTA update. If you can not find and proceed to flash the machine by hand, the following article will guide you how to do it.



Note: Instructions for installing the device only for Samsung Galaxy s2 I9100P. Gozzone will not incur any liability if equipment failure. Although if done correctly these instructions you will not have to worry.

Things to prepare before installing.

• Backup all device data.


• Surely USB Driver installed with proper equipment.


• Check the battery, the battery needs at least 60%


• EFS Backup Folder to store IMEI and other important data.


• Make sure USB Debugging is enabled.


• Installation Instructions use ODIN utility, but it only works in Windows operating system.If you use the Linux operating system (such as Ubuntu) or Mac OS then use CrossOver to run ODIN Utility in your operating system.

File download 
I9100PXXLSU_I9100PXEFLS3_XEF.zip | 556.2 MB 3:07 Odin

Install

• Extract the zip file above, you will receive a batch file tar.md5 and others.


• Extract the zip file Odin and you will get a file with Odin3 v3.07.exe few other files.


• Power off the phone.


• Jump galaxy s2 phone I9100P mode "Download Mode"


• Now run the file Odin3 v3.07.exe


• Connect your phone to the computer.


• Next select the file containing the unzipped files:

- Click the PDA button, select the file tar.md5.
- please phone buttons: select * modem * files with names similar to it.
- Click CSC button: select * CSC * file with the same name of it.
- Click PIT button, select the file. Pit

• In the Odin window, ensure the unit will restart and F.reset Time is selected.


• Check back two steps (select file and in windown)


• After completing the flash machine, your phone will reboot and you will quickly see a message PASS with green background in the box at the top left of Odin.

Đọc tiếp...

Update Android 4.3 Jelly Bean by CM10.2 for LG Optimus G E975

Another fun information for people who are using the LG E975 Optimus G (international version), it is now that they have been able to update their devices to the most advanced version of Android is based on Android 4.3 Jelly Bean based CM10.2 or 10.2 CyanogenMod custom software.

Some attractive features of Android 4.3 Jelly bean that users can use: Manage stereo, better manage Linux Kernel, bluetooth connectivity with the main power device, optimized features work in the version for devices without using speed reduction ...



Note : ROM-only device LG E975 Optimus G is not used for other versions. Gozzone not responsible for any damages that occur on your device. Although if you follow the steps in the guide, it will be hard error occurs.

Things done prior to installation

• Backup to restore data if the RUU is lost.


• Check the battery of the device must also ensure over 60%. Otherwise the ongoing installation will be turned off.


• Certainly installed USB Driver for LG E975 Optimus G.


• USB Debugging must be enabled before installing the ROM


• ClockworkMod Recovery is already on the device.

File Download 
Official ROM Android 4.3 Jelly Bean CM10.2 for LG E975 Optimus G [Filename: cm-10.2-20130819-Nightly-e975.zip] Google Apps [Filename: gapps-jb-20,130,813-signed.zip]

Install

1. Connect your phone to your computer with USB cable.


2. Download and coppy files onto the phone's SD card. Note: do not extract the file.


3. Disconnect the USB and then turn off your phone.


4. Boot into ClockworkMod Recovery


5. Create a Nandroid backup of ROM, so later when ROM does not work as you like or do not like, you can update back to the old ROM.


6. Proceed to delete data.


7. Choose "install zip from sdcard", then select "choose zip from sdcard". Seek file "-10.2-cm-nightly-e975.zip 20,130,819" and press the "Power" button to select. Confirm installation by selecting Yes - Install _____. Zip on the next screen. ROM will automatically install.


8. After completing the ROM installation process, repeat the step 7 but choose gapps-jb-file-signed.zip 20,130,813 instead of ROM zip to install the Google apps package.


9. Back to the main menu of Recovery and select "reboot system now" to reboot the phone and boot into Android 4.3 Jelly Bean ROM customized CM10.2. First time boot will take time so please wait.


10. If you no longer wish to use this ROM that you need to move the old ROM boot into recovery, choose "backup and restore" and restore your ROM with further instructions.

Đọc tiếp...